Guide

How to borrow against commercial property to buy another one

Which title to secure, how to sequence the two settlements, and when a private loan covers the deposit while a bank finishes the main purchase.

Check my loan → No credit check to find out

Updated 18 November 2026 · Secured Business Finance editorial team

Glass-fronted commercial building under a partly cloudy sky

Quick answer

To borrow against commercial property to buy another, you put a first mortgage (or a second mortgage, if a bank loan is already there) over the property you own, draw the equity as the deposit and costs, and settle the new purchase with that money plus a bank or private loan for the balance. The order matters: the equity has to be released before exchange or settlement, not after.

Key points

  • Equity in the property you own can fund the deposit, duty and costs on the next one
  • You choose which title carries the debt: the old property, the new one, or both
  • Securing both together (cross-collateralising) makes selling or refinancing either one harder later
  • PEXA can link up to ten workspaces for a simultaneous settlement, but one that isn't ready delays them all
  • A short-term private loan can cover the deposit while a bank completes its approval on the main purchase

You own a shop, office or warehouse with little or nothing owing on it, and the next one has come up. The question isn’t whether the equity is there. It’s which title carries the new debt, and what has to settle first.

This guide covers the three structures that work, the order they settle in, and where owners get caught. If you want the full purchase map first, read our commercial property purchase timeline; this guide is about the money behind the deposit.

How does borrowing against one commercial property to buy another work?

You register a mortgage over the property you own, take the equity out as cash, and use it for the deposit, duty and costs on the new purchase. The balance is funded by a bank or private loan over the new property. Two loans, two titles, two settlements, and the sequence decides whether it holds together.

The equity available is the property’s value less what’s already owing, capped by the lender’s maximum LVR. On commercial security we lend up to 70% of value (less on large acreage), and we assess value ourselves, so no formal valuation is required. Try the equity calculator for a first read.

Which title should carry the debt: the old one, the new one, or both?

Three structures cover nearly every case, and they behave differently when you later want to sell or refinance. Securing only the property you own keeps the two deals separate. Securing only the new one needs a lender willing to fund the whole price. Securing both is flexible but links them.

Structure How it works Where it bites
Old property only A first or second mortgage over the property you own funds the deposit; a separate loan funds the rest The new purchase still needs its own approval
New property only One loan over the property being bought covers price and costs Needs a big enough LVR; no deposit from you means lenders look hard at the rest of your position
Both (cross-collateralised) One lender takes both titles as security for the combined debt Selling or refinancing either property needs the lender’s consent on both

ASIC’s MoneySmart cautions generally that tying securities together makes switching lenders harder, and the same logic applies on commercial deals. If you think you’ll sell one property within a year or two, keep them separate, or plan for a partial discharge from day one. Our guide on cross-collateralised loans covers how to free a property later.

Will a first mortgage or a second mortgage suit the property I own?

A private first mortgage suits a property with nothing owing, or one where a bank is being paid out. A second mortgage suits a property that already has a bank loan you want to keep. Both release equity; the difference is whether your existing lender stays in place.

  • Debt-free property: a private first mortgage is the cleaner path. One mortgage, one lender, nothing to rank behind.
  • Bank loan in place: a second mortgage sits behind it. Check your bank’s terms first, because some loan documents need first mortgagee consent before a second charge is registered.
  • Needed in days, not weeks: a caveat can protect the lender’s position while the mortgage is prepared, then convert; see converting a caveat to a second mortgage.

Check what your property could release in about a minute; there’s no credit check to find out.

In what order do the two settlements happen?

The equity has to be available before the new purchase needs it. Practically, that means the loan over the property you own settles first, or at the same time, and the funds arrive in your solicitor’s account or the new PEXA workspace before the deposit or settlement date.

Here’s the usual sequence:

  1. Before you sign: get an indicative answer on how much the owned property can release, and confirm who owns it and who must sign.
  2. Exchange: the deposit is due. If the equity isn’t ready, you either need a longer deposit date or a finance clause; otherwise arrange the loan first.
  3. Release loan settles: the new mortgage over the owned property is registered and the funds are paid out.
  4. Purchase settles: the buying workspace in PEXA settles with the equity funds plus the main loan.

PEXA’s Service Charter allows up to ten financial settlements to be linked for simultaneous settlement. The catch is in the same document: if any linked workspace isn’t ready, all of them reschedule to the next available settlement time, and settlements still running at the rebooking cut-off roll to a later business day. Cut-offs differ by state; for instance, Queensland’s is 4pm AEST (3pm in daylight saving) and Western Australia’s is 2pm, or 1pm during daylight saving. One missing discharge authority or signature can push the entire chain back a day.

So don’t link the equity release into the purchase unless you must. A release loan that settles days earlier removes one moving part from settlement day. Our guide on what happens at settlement walks through the workspace side.

What if the bank hasn’t approved the main purchase yet?

Then the deposit is the problem, not the price. A short-term private mortgage over the property you own pays the deposit now, and the bank loan funds the balance when it’s approved. If the bank is slow past settlement, the same equity can be extended to cover more of the price.

This is common with commercial purchases because banks want to understand the building, the tenant and the business before committing; we cover why in why banks decline business loans. Funding can happen in as little as 24 hours from a clean, complete scenario. Interest can be capitalised for up to 6 months, so there are no repayments for the first 6 months, and terms are open with early repayment at any time and no penalty.

Illustrative example: a deposit from the workshop to buy the unit next door

Illustrative: A fabrication business owns its workshop, valued at roughly $2.4m with nothing owing. The unit next door is listed at $1.6m and the seller wants a 10% deposit at exchange and settlement in 42 days. The bank will take 6–8 weeks to approve a loan over the new unit. The owner takes a first mortgage of $600k over the workshop (25% of value), which covers the deposit, entry duty and costs. Exchange happens on schedule. The bank approves in week five and funds the balance at settlement, and the owner plans to repay the private loan from a planned sale of surplus plant within the year. The figures are an example only.

Notice what made it work: the release loan settled first, and the exit was named before the loan started. Lenders weigh the exit as heavily as the equity, so see our guide on exit strategies for a short-term mortgage.

What are the common mistakes?

Most failures aren’t about equity. They’re about timing and ownership. These four cause the most trouble:

  • Releasing equity too late. The deposit is due at exchange, but the loan was only applied for afterwards.
  • Cross-securing without a plan. You later need to sell one property and find the lender controls both.
  • Wrong signatory. The property is held by a trust or company, but the owner applied personally. See company or trust-owned property.
  • Forgetting the cost stack. Duty, legal fees, registration and capitalised interest all come out of the equity. Our guide to private mortgage costs lists them.

On tax, the ATO generally looks at what borrowed money is used for rather than the property that secures it, so interest on funds used to buy an income-producing commercial property is treated differently from private spending. Our guide on whether business loan interest is tax deductible covers it; confirm your own position with your accountant.

Ready to put your equity to work on the next property?

Buying the next property is usually a good problem to have, and the equity you’ve built in the first one is there to be used. The trick is lining up the release, the deposit and the settlement date so nothing waits on anything else.

Enquiring takes about a minute, and it won’t touch your credit file. We don’t send your details to a pile of lenders; a real specialist reads your enquiry and calls you. Please fill the form in accurately, with who owns the property, what’s owing on it and your settlement date, so we can match the right structure first time.

Find out what your property can release → or go straight to apply.

Frequently asked questions

Can I use equity in my commercial property as a deposit on another property?

Yes. Lenders can take a mortgage over the commercial property you already own and release the funds as your deposit, duty and costs. How much depends on the property's value, what's already owing and the lender's maximum LVR. Use the equity calculator for a quick idea of what's available.

Should I secure the old property, the new one, or both?

It depends on what you plan to do with each. Securing only the old property keeps the two deals independent. Securing both can lift how much you can borrow, but the lender will want conditions met on both titles before it releases either one, which complicates a later sale or refinance.

Do I need the equity released before I exchange contracts?

If the contract is unconditional and the deposit is due at exchange, yes. The funds need to be available the day you sign. If you can't have them by then, ask your solicitor whether a longer deposit date or a finance clause is realistic, or arrange the loan first.

Is the interest on money borrowed against one property to buy another deductible?

Generally the ATO looks at what the borrowed money is used for, not which property secures the loan. Funds used to buy an income-producing commercial property are usually treated differently from funds used for private purposes. Your accountant should confirm how it applies to your structure.

Can a company borrow against a property owned by me personally?

Yes, as third-party security, if the owner signs the mortgage and gets independent advice. Where the property sits in a trust or company, the right entity has to sign. Tell us who owns each title when you enquire so the structure is right the first time.

What if the bank approves the new purchase after the date I need the deposit?

That gap is exactly where a short-term first or second mortgage over the property you own is used. It covers the deposit now, and the bank loan, once approved, settles the balance. Many borrowers then refinance the private loan out with the bank or from the sale of another asset.

See where your loan stands — in about 60 seconds

Five quick steps, an instant indicative answer and a lending specialist who calls you back. No credit check to find out.

  • $20k–$5m secured on property
  • 6 months no repayments
  • No sworn valuation